AM26LV32E是TI公司的一款无产品，AM26LV32E是具有 +/-15kV IEC ESD 的低电压高速四路差动线路接收器，本页介绍了AM26LV32E的产品说明、应用、特性等，并给出了与AM26LV32E相关的TI元器件型号供参考。
AM26LV32E - 具有 +/-15kV IEC ESD 的低电压高速四路差动线路接收器 - 无 - RS-422收发器 - TI公司（Texas Instruments，德州仪器）
- Meets or Exceeds Standard TIA/EIA-422-B and ITU Recommendation V.11
- Operates From a Single 3.3-V Power Supply
- Switching Rates up to 32 MHz
- ESD Protection for RS422 Bus Pins (See ESD Ratings)
- Low Power Dissipation: 27 mW Typ
- Open Circuit, Short Circuit, and Terminated Fail-Safe
- ±7-V Common-Mode Input Voltage Range With ±200-mV Sensitivity
- Accepts 5-V Logic Inputs With 3.3-V Supply (Enable Inputs)
- Input Hysteresis: 35 mV Typ
- Pin-to-Pin Compatible With AM26C32, AM26LS32
- Ioff Supports Partial-Power-Down Mode Operation
- High-Reliability Automotive Applications
- Configuration Control/Print Support
- ATM and Cash Counters
- Smart Grid
- AC and Servo Motor Drives
The AM26LV32E device consists of quadruple differential line receivers with 3-state outputs. This device is designed to meet TIA/EIA-422-B and ITU recommendation V.11 drivers with reduced supply voltage. The device is optimized for balanced bus transmission at switching rates up to 32 MHz. The 3-state outputs permit connection directly to a bus-organized system. The AM26LV32E has an internal fail-safe circuitry that prevents the device from putting an unknown voltage signal at the receiver outputs. In the open fail-safe, shorted fail-safe, and terminated fail-safe, a high state is produced at the respective output. This device is supported for partial-power-down applications using Ioff. Ioff circuitry disables the outputs, preventing damaging current back-flow through the device when it is powered down.
| PART NUMBER | PACKAGE | BODY SIZE (NOM) |
|---|---|---|
| AM26LV32E | SO (16) | 10.20 mm x 5.30 mm |
| AM26LV32E | SOIC (16) | 9.90 mm x 3.90 mm |
| AM26LV32E | VQFN (16) | 4.00 mm x 3.50 mm |
| AM26LV32E | TSSOP (16) | 5.00 mm x 4.40 mm |
