LM3489是TI公司的一款控制器(外部开关)产品,LM3489是具有启用引脚的滞后 PFET 降压控制器,本页介绍了LM3489的产品说明、应用、特性等,并给出了与LM3489相关的TI元器件型号供参考。
LM3489 - 具有启用引脚的滞后 PFET 降压控制器 - 控制器(外部开关) - DC/DC开关稳压器 - TI公司(Texas Instruments,德州仪器)
The LM3489 is a high efficiency PFET switching regulator controller that can be used to quickly and easily develop a small, cost effective, switching buck regulator for a wide range of applications. The hysteretic control architecture provides for simple design without any control loop stability concerns using a wide variety of external components. The PFET architecture also allows for low component count as well as ultra-low dropout, 100% duty cycle operation. Another benefit is high efficiency operation at light loads without an increase in output ripple. A dedicated Enable Pin provides a shutdown mode drawing only 7µA. Leaving the Enable Pin unconnected defaults to on.
Current limit protection can be implemented by measuring the voltage across the PFET’s RDS(ON), thus eliminating the need for a sense resistor. A sense resistor may be used to improve current limit accuracy if desired. The cycle-by-cycle current limit can be adjusted with a single resistor, ensuring safe operation over a range of output currents.
- Easy to use control methodology
- No control loop compensation required
- Wide 4.5V to 35V input range
- 1.239V to VIN adjustable output range
- High efficiency 93%
- ±1.3% (±2% over temp) internal reference
- 100% duty cycle operation
- Maximum operation frequency > 1MHz
- Current limit protection
- Dedicated enable pin (on if unconnected)
- Shutdown mode draws only 7µA supply current
- VSSOP-8
- LM3489 is AEC-Q100 Grade 1 qualified