REG710-33是TI公司的一款电荷泵（无感应器）产品，REG710-33是具有固定 3.3V 输出的 30mA 开关电容 DC-DC 转换器，本页介绍了REG710-33的产品说明、应用、特性等，并给出了与REG710-33相关的TI元器件型号供参考。
REG710-33 - 具有固定 3.3V 输出的 30mA 开关电容 DC-DC 转换器 - 电荷泵（无感应器） - DC/DC开关稳压器 - TI公司（Texas Instruments，德州仪器）
- Wide Input Voltage Range: 1.8 V to 5.5 V
- Automatic Step-Up and Step-Down Operation
- Low Input Current Ripple
- Low Output Voltage Ripple
- Minimum Number of External Components—No Inductors
- 1-MHz Internal Oscillator Allows Small Capacitors
- Shutdown Mode
- Thermal and Current Limit Protection
- Six Fixed Output Voltages Available:
- 2.5 V, 2.7 V, 3 V, 3.3 V, 5 V, 5.5 V
- White LED Driver
- Smart Card Readers
- SIM Cards
- Handheld devices
- Modems
- PCMCIA Cards
- LCD Displays
- Battery Backup Supplies
The REG710 family of devices are switched capacitor voltage converters that generate regulated, low-ripple output voltage from an unregulated input voltage. A wide input supply voltage from 1.8 V to 5.5 V makes the REG710 family of devices ideal for a variety of battery sources, such as single-cell Li-Ion, or 2-cell and 3-cell nickel-based or alkaline-based chemistries.
The input voltage may vary above and below the output voltage and the output remains in regulation. The device works as step-up or step-down converters without the need of an inductor, providing low EMI DC-DC conversion. The high switching frequency allows the use of small surface-mount capacitors, saving board space and reducing cost. The REG710 device is thermally protected and current limited, protecting the load and the regulator during fault conditions. Typical ground pin current (quiescent current) is 65 μA with no load, and less than 1 μA in shutdown mode.
| PART NUMBER | PACKAGE | BODY SIZE (NOM) |
|---|---|---|
| REG710 | SOT-23 (6) | 2.90 mm × 1.60 mm |
| REG71050 | SOT (6) | 2.90 mm × 1.60 mm |
| SON (6) | 2.00 mm × 2.00 mm | |
| REG71055 | SOT-23 (6) | 2.90 mm × 1.60 mm |
