SN65HVD888是TI公司的一款无产品,SN65HVD888是具有 IEC-ESD 保护的 SN65HVD888 总线极性校正 RS-485 收发器,本页介绍了SN65HVD888的产品说明、应用、特性等,并给出了与SN65HVD888相关的TI元器件型号供参考。
SN65HVD888 - 具有 IEC-ESD 保护的 SN65HVD888 总线极性校正 RS-485 收发器 - 无 - RS-485收发器 - TI公司(Texas Instruments,德州仪器)
- Exceeds Requirements of EIA-485 Standard
- Bus-Polarity Correction Within 76 ms (tFS)
- Data Rate: 300 bps to 250 kbps
- Works With Two Configurations:
- Failsafe Resistors Only
- Failsafe and Differential Termination Resistors
- Up to 256 Nodes on a Bus (1/8 Unit Load)
- SOIC-8 Package for Backward Compatibility
- Bus-Pin Protection:
- ±16 kV HBM protection
- ±12 kV IEC61000-4-2 Contact Discharge
- +4 kV IEC61000-4-4 Fast Transient Burst
- E-Metering Networks
- Industrial Automation
- HVAC Systems
- DMX512-Networks
- Process Control
- Battery-Powered Applications
- Motion Control
- Telecom Equipment
The SN65HVD888 is a low-power RS-485 transceiver with automatic bus-polarity correction and transient protection. Upon hot plug-in, the device detects and corrects the bus polarity within the first 76 ms of bus idling. On-chip transient protection protects the device against IEC61000 ESD and EFT transients. This device has robust drivers and receivers for demanding industrial applications. The bus pins are robust to electrostatic discharge (ESD) events, with high levels of protection to Human-Body Model (HBM), Air-Gap Discharge, and Contact Discharge specifications.
The device combines a differential driver and a differential receiver, which operate together from a single 5-V power supply. The driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. The device features a wide common-mode voltage range making the device suitable for multi-point applications over long cable runs. The SN65HVD888 is available in an SOIC-8 package, and is characterized from –40°C to 85°C.
PART NUMBER | PACKAGE | BODY SIZE (NOM) |
---|---|---|
SN65HVD888 | SOIC (8) | 4.90 mm × 3.91 mm |