The AUP family is TI’s premier solution to the industry’s low power needs in battery-powered portable applications. This family ensures a very low static and dynamic power consumption across the entire VCC range of 0.8 V to 3.6 V, resulting in an increased battery life. This product also maintains excellent signal integrity (see Figure 1 and Figure 2).

This buffer/driver is a single line driver with a 3-state output. The output is disabled when the output-enable (OE) input is high. This device has the input-disable feature, which allows floating input signals.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

NanoStar™ package technology is a major breakthrough in IC packaging concepts, using the die as the package.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

• Available in the Texas Instruments NanoStar’ Package
• Low Static-Power Consumption
  • ICC = 0.9 µA Max
• Low Dynamic-Power Consumption
  • Cpd = 4.2 pF at 3.3 V Typ
• Low Input Capacitance
  • CI = 1.5 pF Typ
• Low Noise – Overshoot and Undershoot <10% of VCC
• Input-Disable Feature Allows Floating Input Conditions
• Ioff Supports Partial Power-Down-Mode Operation
• Input Hysteresis Allows Slow Input Transition and Better Switching Noise Immunity at the Input
• Wide Operating VCC Range of 0.8 V to 3.6 V
• Optimized for 3.3-V Operation
• 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
• tpd = 4.7 ns Max at 3.3 V
• Suitable for Point-to-Point Applications
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Performance Tested Per JESD 22
  • 2000-V Human-Body Model(A114-B, Class II)
  • 1000-V Charged-Device Model (C101)

NanoStar Is a trademark of Texas Instruments