TI,TI公司,TI代理商
TI(德州仪器)| TI产品型号搜索
专营TI元器件,强大的现货交付能力,解决您的采购难题
全流程提供TI现货供应链服务
当前位置:TI公司 > > TI芯片 >> SN74LVC1G374-Q1
SN74LVC1G374-Q1技术文档下载:
SN74LVC1G374-Q1技术文档产品手册下载
SN74LVC1G374-Q1 - 产品图解:
SN74LVC1G374-Q1-具有三态输出的汽车类单路 D 类触发器
承诺原装正品
专营TI,真正优化您的供应链
TI产品 - SN74LVC1G374-Q1介绍
SN74LVC1G374-Q1 - 具有三态输出的汽车类单路 D 类触发器

SN74LVC1G374-Q1是TI公司的一款无产品,SN74LVC1G374-Q1是具有三态输出的汽车类单路 D 类触发器,本页介绍了SN74LVC1G374-Q1的产品说明、应用、特性等,并给出了与SN74LVC1G374-Q1相关的TI元器件型号供参考。

SN74LVC1G374-Q1 - 具有三态输出的汽车类单路 D 类触发器 - 无 - 小尺寸逻辑器件 - TI公司(Texas Instruments,德州仪器)

产品描述

This single D-type flip-flop is designed for 1.65-V to 5.5-V VCC operation.

The SN74LVC1G374 features a 3-state output designed specifically for driving highly capacitive or relatively low-impedance loads. This device is particularly suitable for implementing buffer registers, input/output (I/O) ports, bidirectional bus drivers, and working registers.

On the positive transition of the clock (CLK) input, the Q output is set to the logic level set up at the data (D) input.

A buffered output-enable (OE) input can be used to place the output in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the output neither loads nor drives the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.

OE does not affect the internal operations of the flip-flop. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

产品特性

  • Qualified for Automotive Applications
  • Supports 5-V VCC Operation
  • Inputs Accept Voltages to 5.5 V
  • Max tpd of 4 ns at 3.3 V
  • Low Power Consumption, 10-µA Max ICC
  • ±24-mA Output Drive at 3.3 V
  • Ioff Supports Partial-Power-Down Mode Operation
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Protection Exceeds JESD 22
    • 2000-V Human-Body Model (A114-A)
    • 200-V Machine Model (A115-A)
    • 1000-V Charged-Device Model (C101)

下面可能是您感兴趣的TI公司无元器件
  • SN74AUP1G126 - 具有三态输出的低功耗单路总线缓冲器闸
  • SN74BCT8245A - 具有八路总线收发器的 IEEE 标准 1149.1 (JTAG) 边界扫描测试设备
  • TPS622317 - 采用 1x1.5 SON 封装的 3MHz、2.9V 超小型降压转换器
  • PCI2050B - PCI 至 PCI 桥接器
  • UCC24650 - Output Voltage Monitor with Wake-Up Alarm Signaling
  • TLC320AD545 - 具有混合运算放大器、扬声器驱动器的单通道编解码器
  • DAC7664 - 数模转换器;四路、16 位、12uS 稳定时间、+/- 1 LSB DNL
  • TPS92550 - 450mA 14W 恒定电流降压 LED 驱动器微型模块
  • THS1031 - 10 位、30MSPS ADC、具有单通道、集成可编程数字钳位和增益、超范围指示、关断状态
  • TLV320AIC3206 - 具有 DirectPath(TM) 耳机放大器的超低功耗立体声编解码器
  • 节约时间成本,提高采购效率,TI官网授权代理
    TI公司|TI德州仪器|德州仪器TI公司代理商|TI芯片代理商
    TI公司产品现货专家,订购TI公司产品不限最低起订量,TI产品大陆现货即时发货,香港库存3-5天发货,海外库存7-10天发货
    寻找全球TI代理商现货货源 - TI公司(德州仪器)电子元件在线订购