TMP102是TI公司的一款本地温度传感器产品,TMP102是具有 I2C/SMBus 接口且工作电压为 1.4V 的 ±1°C 温度传感器,支持报警功能,本页介绍了TMP102的产品说明、应用、特性等,并给出了与TMP102相关的TI元器件型号供参考。
TMP102 - 具有 I2C/SMBus 接口且工作电压为 1.4V 的 ±1°C 温度传感器,支持报警功能 - 本地温度传感器 - 温度传感器和控制IC - TI公司(Texas Instruments,德州仪器)
- SOT563 Package (1.6-mm × 1.6-mm) is a 68% Smaller Footprint than SOT-23
- Accuracy Without Calibration:
- 2.0°C (max) from –25°C to 85°C
- 3.0°C (max) from –40°C to 125°C
- Low Quiescent Current:
- 10-μA Active (max)
- 1-μA Shutdown (max)
- Supply Range: 1.4 to 3.6 V
- Resolution: 12 Bits
- Digital Output: SMBus™, Two-Wire, and I2C Interface Compatibility
- NIST Traceable
- Portable and Battery-Powered Applications
- Power-supply Temperature Monitoring
- Computer Peripheral Thermal Protection
- Notebook Computers
- Battery Management
- Office Machines
- Thermostat Controls
- Electromechanical Device Temperatures
- General Temperature Measurements:
- Industrial Controls
- Test Equipment
- Medical Instrumentations
The TMP102 device is a digital temperature sensor ideal for NTC/PTC thermistor replacement where high accuracy is required. The device offers an accuracy of ±0.5°C without requiring calibration or external component signal conditioning. Device temperature sensors are highly linear and do not require complex calculations or lookup tables to derive the temperature. The on-chip 12-bit ADC offers resolutions down to 0.0625°C.
The 1.6-mm × 1.6-mm SOT563 package is 68% smaller footprint than an SOT-23 package. The TMP102 device features SMBus™, two-wire and I2C interface compatibility, and allows up to four devices on one bus. The device also features an SMBus alert function. The device is specified to operate over supply voltages from 1.4 to 3.6 V with the maximum quiescent current of 10 µA over the full operating range.
The TMP102 device is ideal for extended temperature measurement in a variety of communication, computer, consumer, environmental, industrial, and instrumentation applications. The device is specified for operation over a temperature range of –40°C to 125°C.
The TMP102 production units are 100% tested against sensors that are NIST-traceable and are verified with equipment that are NIST-traceable through ISO/IEC 17025 accredited calibrations.
PART NUMBER | PACKAGE | BODY SIZE (NOM) |
---|---|---|
TMP102 | SOT563 (6) | 1.60 mm × 1.20 mm |