• Up To 95% Efficiency
• Output Current for DC-DC Converters:
  • TPS65050, TPS65054: 2 × 0.6 A
  • TPS65051, TPS65052 and TPS65056: DCDC1 = 1 A; DCDC2 = 0.6 A
• Output Voltages for DC-DC Converters
  • Externally Adjustable and Fixed Versions Available
  • Digital Voltage Selection for the DCDC2
• VI Range for DC-DC Converters From 2.5 V to 6 V
• 2.25-MHz Fixed-Frequency Operation
• Power Save Mode at Light Load Current
• 180° Out-of-Phase Operation
• Output Voltage Accuracy in PWM Mode ±1%
• Total Typical 32-μA Quiescent Current for Both DC-DC Converters
• 100% Duty Cycle for Lowest Dropout
• Two General-Purpose 400-mA, High PSRR LDOs
• Two General-Purpose 200-mA, High PSRR LDOs
• VI range for LDOs From 1.5 V to 6.5 V
• Digital Voltage Selection for the LDOs

• Cell Phones, Smart Phones
• WLAN
• PDAs, Pocket PCs
• OMAP™ and Low-Power TMS320™ DSP Supply
• Samsung S3C24xx Application Processor Supply
• Portable Media Players

The TPS6505x family of devices are integrated power-management ICs for applications powered by one Li-Ion or Li-Polymer cell, which require multiple power rails. The TPS6505x devices provide two highly efficient, 2.25-MHz step-down converters targeted at providing the core voltage and I/O voltage in a processor-based system. Both step-down converters enter a low-power mode at light load for maximum efficiency across the widest possible range of load currents. For low noise applications, the devices can be forced into fixed-frequency PWM mode by pulling the MODE pin high. The TPS6505x devices also integrate two 400-mA LDO and two 200-mA LDO voltage regulators. Each LDO operates with an input voltage range from 1.5 V to 6.5 V, allowing them to be supplied from one of the step-down converters or directly from the main battery.