TPS78633是TI公司的一款单通道LDO产品,TPS78633是单输出 LDO、1.5A、固定电压 (3.3V)、低噪声、高 PSRR,本页介绍了TPS78633的产品说明、应用、特性等,并给出了与TPS78633相关的TI元器件型号供参考。
TPS78633 - 单输出 LDO、1.5A、固定电压 (3.3V)、低噪声、高 PSRR - 单通道LDO - 线性稳压器(LDO) - TI公司(Texas Instruments,德州仪器)
- 1.5-A Low-Dropout Regulator With Enable
- Available in Fixed and Adjustable (1.2 V to 5.5 V) Output Versions
- High PSRR (49 dB at 10 kHz)
- Ultralow Noise (48 μVRMS, TPS78630)
- Fast Start-Up Time (50 μs)
- Stable With a 1-μF Ceramic Capacitor
- Excellent Load and Line Transient Response
- Very Low Dropout Voltage (390 mV at Full Load, TPS78630)
- 3 × 3 SON PowerPAD™, 6-Pin SOT223 and 5-Pin DDPAK Package
- RF: VCOs, Receivers, ADCs
- Audio
- Bluetooth®, Wireless LAN
- Cellular and Cordless Telephones
- Handheld Organizers, PDAs
The TPS786 family of low-dropout (LDO) low-power linear voltage regulators features high power-supply rejection ratio (PSRR), ultralow noise, fast start-up, and excellent line and load transient responses in small outline, SOT223-6 and DDPAK-5 packages. Each device in the family is stable, with a small 1-μF ceramic capacitor on the output. The family uses an advanced, proprietary BiCMOS fabrication process to yield extremely low dropout voltages (for example, 390 mV at 1.5 A). Each device achieves fast start-up times (approximately 50 μs with a 0.001-μF bypass capacitor) while consuming very low quiescent current (265 μA, typical). Moreover, when the device is placed in standby mode, the supply current is reduced to less than 1 μA. The TPS78630 exhibits approximately 48 μVRMS of output voltage at 3-V output noise with a 0.1-μF bypass capacitor. Applications with analog components that are noise sensitive, such as portable RF electronics, benefit from the high PSRR, low noise features, and the fast response time.
PART NUMBER | PACKAGE | BODY SIZE (NOM) |
---|---|---|
TPS786 | TO-263 (5) | 10.16 mm × 8.42 mm |
SOT-223 (6) | 6.50 mm × 3.50 mm | |
SON (8) | 3.00 mm × 3.00 mm |