The TS3USB221A is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (900 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).

The TS3USB221A integrates ESD protection cells on all pins, is available in a tiny µQFN package (2.0 mm × 1.5 mm) and is charaterized over the free air temperature range from –40°C to 125°C.

• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
  • Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
  • Device HBM ESD Classification Level H2
  • Device CDM ESD Classification Level C5
• VCC Operation at 2.5 V to 3.3 V
• VI/O Accepts Signals Up to 5.5 V
• 1.8-V Compatible Control-Pin Inputs
• Low-Power Mode When OE Is Disabled (1 µA)
• rON = 16 Ω Maximum
• ΔrON = 0.2 Ω Typical
• Cio(on) = 6 pF Typical
• Low Power Consumption (30 µA Maximum)
• High Bandwidth (900 MHz Typical)
• ESD Performance Tested Per JESD 22
  • 7000-V Human-Body Model (A114-B, Class II)
  • 1000-V Charged-Device Model (C101)
• ESD Performance I/O to GND Per JESD 22
  • 12-kV Human-Body Model
• APPLICATIONS
  • Routes Signals for USB 1.0, 1.1, and 2.0