TI,TI公司,TI代理商
TI(德州仪器)| TI产品型号搜索
专营TI元器件,强大的现货交付能力,解决您的采购难题
全流程提供TI现货供应链服务
当前位置:TI公司 > > TI芯片 >> UCC2581
UCC2581技术文档下载:
UCC2581技术文档产品手册下载
UCC2581 - 产品图解:
UCC2581-微功耗电压模式 PWM
承诺原装正品
专营TI,真正优化您的供应链
TI产品 - UCC2581介绍
UCC2581 - 微功耗电压模式 PWM

UCC2581是TI公司的一款PWM与谐振控制器产品,UCC2581是微功耗电压模式 PWM,本页介绍了UCC2581的产品说明、应用、特性等,并给出了与UCC2581相关的TI元器件型号供参考。

UCC2581 - 微功耗电压模式 PWM - PWM与谐振控制器 - 离线隔离型DC/DC控制器和转换器 - TI公司(Texas Instruments,德州仪器)

产品描述

The UCC3581 voltage mode pulse width modulator is designed to control low power isolated DC - DC converters in applications such as Subscriber Line Power (ISDN I.430). Primarily used for single switch forward and flyback converters, the UCC3581 features BiCMOS circuitry for low startup and operating current, while maintaining the ability to drive power MOSFETs at frequencies up to 100kHz. The UCC3581 oscillator allows the flexibility to program both the frequency and the maximum duty cycle with two resistors and a capacitor. A TTL level input is also provided to allow synchronization to an external frequency source.

The UCC3581 includes programmable soft start circuitry, overcurrent detection, a 7.5V linear preregulator to control chip VDD during startup, and an on-board 4.0V logic supply.

The UCC3581 provides functions to maximize light load efficiency that are not normally found in PWM controllers.

A linear preregulator driver in conjunction with an external depletion mode N-MOSFET provides initial controller power. Once the bootstrap supply is functional, the preregulator is shut down to conserve power. During light load, power is saved by providing a programmable minimum duty cycle clamp. When a duty cycle below the minimum is called for, the modulator skips cycles to provide the correct average duty cycle required for output regulation. This effectively reduces the switching frequency, saving significant gate drive and power stage losses.

The UCC3581 is available in 14-pin plastic and ceramic dual-in-line packages and in a 14-pin narrow body small outline IC package (SOIC). The UCC1581 is specified for operation from –55°C to +125°C, the UCC2581 is specified for operation from –40°C to +85°C, and the UCC3581 is specified for operation from 0°C to +70°C.

产品特性

  • Low 85µA Startup Current
  • Low 300µA Operating Current
  • Automatically Disabled Startup Preregulator
  • Programmable Minimum Duty Cycle with Cycle Skipping
  • Programmable Maximum Duty Cycle
  • Output Current 1A Peak Source and Sink
  • Programmable Soft Start
  • Programmable Oscillator Frequency
  • External Oscillator Synchronization Capability

下面可能是您感兴趣的TI公司PWM与谐振控制器元器件
  • LP2951 - 单路输出 LDO、100mA、可调节电压、宽输入电压范围、复位标志
  • ADC088S052 - 8 通道、200 ksps 至 500 ksps、8 位 A/D 转换器
  • BQ294502 - 用于 2 至 3 节锂离子电池的过压保护器件,具有 4.35v OVP
  • UCC38503 - BiCMOS PFC/PWM 组合控制器
  • PTV12010L - 0.8 至 1.8 V 8A 的 12V 输入非隔离宽调节 SIP 模块
  • MSP430F5171 - MSP430F51x2 混合信号微处理器
  • CD74HC151 - 高速 CMOS 逻辑 8 输入多路复用器
  • UC3176 - 全桥接功率放大器
  • TRF3765 - 具有集成式 VCO 和最多 8 个输出的 300M-4800MHz 低噪声整数 N/分数 N PLL
  • TPS61251 - 用于电池备份充电的 3.5MHz、1.5A 电流限制、92% 高效升压转换器
  • 节约时间成本,提高采购效率,TI官网授权代理
    TI公司|TI德州仪器|德州仪器TI公司代理商|TI芯片代理商
    TI公司产品现货专家,订购TI公司产品不限最低起订量,TI产品大陆现货即时发货,香港库存3-5天发货,海外库存7-10天发货
    寻找全球TI代理商现货货源 - TI公司(德州仪器)电子元件在线订购